Geometric Planter and Sconce

Volume 29 - Issue 2

A 5" x 5" square, open-topped plant or candle holder set at an angle for a diamond-shaped appearance. Four 1 1/4" x 5" strips of clear glue chip are used to construct the sides of the three-dimensional frame, and a 3 1/2" square piece of Seafoam Green wispy glass is cut in half on the diagonal to fill the front and back bottom corners. The finished project is hung from a swivel hook. This project was constructed using the copper foil technique. This article was originally published on page 6 in the Summer 2013 issue of Glass Patterns Quarterly. Design, Fabrication, and Text by Lidia K. Anderson


Glass Patterns Quarterly®
Magazine Subscription Management Software by SimpleCirc